Description
The ideal tool for lifting a load!
The PCH1000 Portable Capstan Rope Pulling / lifting Winch has been designed specifically for lifting applications on a work site such as assembling telecommunications structures or installing various equipment. It can lift a load of 250 kg with a single line and a pulley system doubles the strength to 500 kg.
Its integrated rope grabbing system (brake) will hold the load in position allowing the operator to work safely.
This system can be used to lift or lower a load. A wide of accessories are available to simplify the installation process and anchor the winch at various anchoring points such as a vehicle, a post, a pylon and more.
Find out more by downloading the user manual below.
*Note: One (1) anchor polyester sling 60 mm x 2 m is always included with every winch.
Capacity
Maximum pulling force with installed drum: 775 kg
Maximum pulling force with optional drum: 540 kg
Rated lifting capacity with installed drum: 250 kg
Rated lifting capacity with optional drum: 175 kg
Capstan Drums
Installed: 57 mm
Optional: 88 mm
Speed
57 mm drum: 12 m/min
85 mm drum: 18 m/min
Rope
Lifting: Low stretch double braided polyester – unlimited length – eye splice and thimble mandatory for lifting applications
Minimum diameter: 12 mm
Maximum diameter: 13 mm
Ideal diameter: 12 mm
Engine/Motor & Gear Box
Engine/Motor: Honda 4-Stroke GX-50 CC
Gear box and gears: Aluminium alloy gear box. Heat treated 3 stage spur gears. Shafts mounted on ball bearings. Oil bath lubrication.
Gear ratio: 110:1
Brake: Anti-reversing needle bearing
Clutch: Centrifugal
Drum turns with engine idling: No
Work cycle: Continuous
Weight & Dimensions
Weight: 19 kg
Length: 50.5 cm
Width: 37.1 cm
Height: 36.1 cm
Anchor
Included: Polyester sling 60 mm x 2 m (PCA-1260)
Warranty
Private use: 2 years
Commercial use: 1 year
Engine/Motor: Honda International Warranty
Other
Certification: CE and M3 (ISO) Lifting
